MSP Airport Parking DoubleTree: Rates & Shuttle Guide 2026

Back to MSP Airport Hotel Park and Fly Packages 2026

MSP airport parking at the DoubleTree by Hilton Bloomington Minneapolis South is a self-park, uncovered hotel lot located at 7800 Normandale Blvd, Bloomington, MN — roughly 9 miles from Minneapolis-Saint Paul International Airport. Travelers park their car at the hotel, take a free shuttle to the terminals, and fly out. Rates start significantly lower than on-airport options, making this a popular choice for multi-day trips.

• Location: 7800 Normandale Blvd, Bloomington, MN — about 9 miles from MSP Airport
• Parking type: Self-park, uncovered hotel lot
• Shuttle: Free shuttle to Terminal 1 and Terminal 2 (verify current hours before booking)
• Savings: Park here and save up to 60% vs. the $30/day Terminal 1 daily ramps
• Best for: Travelers flying out of either terminal who want hotel-quality facilities at a lower daily rate
• Book in advance: Pre-booking locks in the lowest rate and guarantees your space, especially around holidays

Compare MSP airport parking rates — including DoubleTree and 5 other verified lots — on TriplyPro and save up to 60% vs. on-airport prices.

What Is DoubleTree MSP Airport Parking and How Does It Work?

DoubleTree MSP airport parking is a park-and-fly arrangement where you leave your car in the hotel's surface lot and ride a complimentary shuttle to the airport. It's one of several hotel parking options near Minneapolis-Saint Paul International Airport that cost less per day than the on-airport ramps managed by the Metropolitan Airports Commission (MAC).

The process is straightforward. You drive to the DoubleTree by Hilton Bloomington Minneapolis South, check in with the front desk or parking attendant, and leave your vehicle in the designated lot. The hotel's shuttle picks you up and drops you off at either Terminal 1 – Lindbergh or Terminal 2 – Humphrey, depending on your airline. When you return, you call the hotel from baggage claim and the shuttle comes back to get you.

You don't need to be a hotel guest to use the parking. The lot is open to fly-and-park travelers who book the parking-only option. That said, some travelers combine an overnight stay with their parking — known as a Park, Stay & Go package — which we cover in detail below.

How Much Does DoubleTree by Hilton MSP Airport Parking Cost?

The DoubleTree MSP parking rate varies by how and where you book. Based on current rates available through third-party booking platforms (verified June 2026), travelers typically find daily rates starting around $9–$15/day when booked in advance online. Drive-up or walk-in rates at the hotel may be higher.

For context, here's how the DoubleTree lot compares to other nearby options and the official MSP on-airport rates:

Even at the higher end of hotel park-and-fly rates, you're looking at savings of $15–$20/day compared to the Terminal 1 daily ramps. Over a 7-day trip, that adds up to $105–$140 in savings. The more days you park, the more the hotel option pays off. For a full breakdown of off-site pricing, see our guide to MSP airport parking off-site options and rates.

How Does the Free Shuttle Work Between DoubleTree and MSP Airport?

The DoubleTree hotel operates a complimentary shuttle between the hotel and Minneapolis-Saint Paul International Airport. The shuttle serves both terminals — Terminal 1 – Lindbergh (used by Delta, American, United, Alaska, and others) and Terminal 2 – Humphrey (used by Southwest, Sun Country, Frontier, Allegiant, and others).

Here's how the shuttle process works:

1. Departing: Notify the front desk or call ahead before you need the shuttle. Allow extra time — the drive from Bloomington to MSP is roughly 15–20 minutes depending on traffic.
2. Drop-off: The shuttle drops you at your terminal's departures level. Confirm your terminal before you leave — check MSP's terminal information page if you're unsure which terminal your airline uses.
3. Return pickup: When you land, call the hotel from baggage claim. The shuttle will come to the arrivals level. For Terminal 2, some sources note pickup is arranged on request — confirm this detail when you book, especially for late-night arrivals.

Important winter note: MSP winters are serious. Snow and ice regularly affect road conditions along I-494 and the Bloomington corridor. Always add 15–20 extra minutes to shuttle travel time in December through March. Check real-time road conditions on the Waze live traffic map before heading to the hotel.

Shuttle hours are a critical detail. Hotel shuttles typically operate during peak hours — often 4 AM to midnight — but this can vary. If your flight departs before 4 AM or arrives after midnight, call the hotel directly to confirm shuttle availability. For 24/7 shuttle coverage, EZ Air Park and Shepard Road Airport Parking are more reliable alternatives, as detailed in our guide to hotel parking near MSP with shuttle service.

DoubleTree MSP Parking vs. Official MSP Airport Parking — Which Is Cheaper?

Official on-airport parking managed by the Metropolitan Airports Commission costs $30/day at Terminal 1 daily ramps and $19/day at the Quick Ride Ramp (with free shuttle). Hotel park-and-fly options near MSP consistently undercut these prices — often by 50% or more.

The tradeoff is time. On-airport parking puts you steps from check-in. Hotel parking adds a shuttle ride — typically 15–20 minutes each way. For a 5-day trip, though, that time cost is worth it for most travelers. A 5-day stay at the Terminal 1 ramps costs $150. The same trip at a hotel lot in the $10–$15 range costs $50–$75 — a saving of $75–$100.

The Quick Ride Ramp at $19/day is the best value on-airport option since it already includes a free shuttle. But even that costs more per day than most hotel lots. For more detail on the Quick Ride option, see our MSP Quick Ride Ramp guide.

Bottom line: If you're parking for 3+ days, hotel park-and-fly wins on price. If you're parking for just 1–2 hours or overnight for an early morning flight, on-airport is more convenient.

What Is the Park, Stay & Go Package at DoubleTree Minneapolis Airport?

A Park, Stay & Go package combines one night's hotel stay with a set number of days of free or discounted parking. It's designed for travelers with early morning flights who want to sleep near the airport, avoid traffic the next day, and leave their car in a secure lot while they travel.

Typical package inclusions at airport hotels like the DoubleTree Bloomington:

• One night's hotel stay (standard room)
• A set number of days of complimentary parking (commonly 7–14 days — confirm at booking)
• Free shuttle to and from MSP airport
• Access to hotel amenities (pool, fitness center, restaurant)

These packages are especially popular around major holidays when on-airport lots fill quickly. The Metropolitan Airports Commission recommends pre-booking for Thanksgiving, Christmas, and spring break travel. A Park, Stay & Go deal can lock in both your room and your parking space in one reservation.

Availability and exact inclusions vary by season. Always read the fine print on parking days included — some packages cover 7 days, others cover fewer. If you exceed the included days, you'll pay additional nightly parking fees. For a broader look at how these packages work across MSP-area hotels, see the full MSP airport hotel park and fly guide.

Where Is DoubleTree Bloomington Located Relative to MSP Airport?

The DoubleTree by Hilton Bloomington Minneapolis South is located at 7800 Normandale Blvd, Bloomington, MN 55437. It sits in the Bloomington business corridor, roughly 9 miles from MSP airport via I-494.

From I-494, take the Normandale Blvd exit and head south. The hotel is a short distance from the interchange. Driving time to the airport is typically 15–20 minutes in normal traffic, though morning rush hour along I-494 can stretch that to 30 minutes or more. The hotel is also close to the Mall of America — which sits about 2 miles east along I-494. That proximity makes it convenient for travelers who want to shop before or after a trip without driving back into the city.

Key nearby roads include Interstate 494 (runs along the south side of MSP), MN-77 / Cedar Avenue (east side of the airport), and 34th Avenue South (west access). If you're coming from downtown Minneapolis or Saint Paul, I-35W or I-35E connect to I-494 for direct access to the Bloomington area.

How to Book DoubleTree MSP Airport Parking and Save Up to 60%

Booking in advance — rather than showing up and paying at the hotel — almost always gets you a lower rate. Third-party platforms aggregate hotel parking rates and often surface discounts not available at the front desk.

1. Compare options first. Search MSP airport parking on TriplyPro to compare the DoubleTree lot alongside EZ Air Park, Shepard Road, Comfort Inn, and other verified options — all with real rates and shuttle details.
2. Select your dates. Enter your departure and return dates. Daily rates compound, so check multi-day pricing carefully.
3. Review shuttle hours. Confirm the shuttle operates during your specific flight window — especially for early morning departures or late arrivals.
4. Book with free cancellation. Most hotel park-and-fly options offer free cancellation. This is important around peak travel periods when plans change.
5. Save your confirmation. Screenshot or print your confirmation. Bring it to the hotel on departure day.

Before you arrive at the airport, review TSA's official screening rules so you know what to expect at security. If you travel frequently, TSA PreCheck can significantly cut your security wait time at MSP — a real benefit when you're running on a hotel shuttle schedule.

Is DoubleTree MSP Airport Parking Safe and Secure?

Hotel parking lots at major airport-area properties like the DoubleTree Bloomington typically include security cameras, perimeter lighting, and front-desk staff on-site around the clock. This is a step up from unattended surface lots — there are hotel employees present whenever the property is staffed.

That said, the lot is an uncovered, outdoor surface lot. Your car is exposed to weather — important in Minnesota, where winters bring heavy snow, ice, and temperatures well below freezing. If covered parking is a priority, the InterContinental MSP Airport offers a covered garage connected to Terminal 1 via enclosed skyway at $29/day, or the Shepard Road Airport Parking lot offers a covered ramp option at $14.50/day.

For ADA accessibility, hotel properties are required to provide accessible parking spaces under federal guidelines. If you have specific mobility needs, call the hotel ahead of time to confirm space availability and shuttle accessibility.

MSP's on-airport ramps also offer accessible parking in all ramps at both terminals, with ADA-compliant spaces on lower levels closest to terminal access points — per the Metropolitan Airports Commission. For a full breakdown of on-airport ramp options, see the MSP Terminal 1 parking ramp guide.

MSP is currently in the middle of a $1.9 billion capital improvement program (2026–2028), with $501 million allocated in 2026 alone. The Terminal 2 North Expansion is active, though both terminals remain fully operational with no parking closures expected in 2026. Allow a little extra time if arriving at Terminal 2.

Ready to lock in your MSP airport parking? Compare all verified MSP park-and-fly lots on TriplyPro — rates from $9.95/day with free cancellation.

Complete MSP Airport Parking Guide