MSP Airport Parking Park N Go: Rates, Shuttle & Review 2026

Back to MSP Airport Parking Off-Site: Best Lots & Rates 2026 | Complete MSP Airport Parking Guide

Park 'N Go at MSP Airport is a privately operated off-site parking lot in Bloomington, Minnesota, offering self-park spaces with free 24/7 shuttle service to both Terminal 1 and Terminal 2 at Minneapolis-Saint Paul International Airport. At $20/day (verified June 2026), it costs 33% less than MSP's Terminal 1 daily ramps ($30/day) and includes amenities like luggage assistance, gated entry, and a gate attendant — features the on-airport ramps don't offer.

• Rate: $20/day — saves up to $10/day vs Terminal 1 daily ramps at $30/day
• Shuttle: Free, 24/7 service to both Terminal 1 and Terminal 2, every 5-10 minutes
• Distance: 8-12 minutes from MSP terminals by shuttle
• Amenities: Gated entry, security cameras, luggage assistance, tire and battery assistance, on-site gate attendant
• Booking: Pre-booking online is strongly recommended, especially for holiday travel
• Cancellation: Free cancellation available — check your booking platform for exact terms

What Is Park N Go MSP and Where Is It Located?

Park 'N Go is an off-site airport parking lot that gives MSP travelers an affordable alternative to on-airport ramps. The lot is located in Bloomington, MN, just minutes from the airport via Interstate 494 — the main highway running along the south side of MSP. It serves travelers flying out of both Terminal 1 (Lindbergh) and Terminal 2 (Humphrey).

The lot operates 24 hours a day, 7 days a week. A gate attendant is on duty, and the facility uses gated entry to control access. This is not a hotel lot — it's a dedicated parking operation focused solely on airport travelers. The uncovered, self-park format keeps costs low while the staffed entry adds a layer of security you won't find at every off-site option.

For a broader look at all off-site lots near MSP — including cheaper options starting at $9.95/day — see our guide to car parking near MSP airport, which compares every major nearby lot side by side.

Compare Park N Go against all MSP parking options — rates from $9.95/day on Triply

How Much Does Park N Go at MSP Airport Cost?

Park 'N Go MSP charges $20/day for self-park (verified June 2026), based on current rates listed on booking platforms. That's a flat daily rate with no hourly breakdowns — straightforward pricing for trips of any length.

Here's how that stacks up against every major MSP parking option:

On a 7-day trip, Park 'N Go saves you $70 compared to Terminal 1 daily ramps. Compared to Value Parking at Terminal 2, the savings are small — just $7 total over a week — but Park 'N Go adds luggage help and a gate attendant. Against the Quick Ride Ramp at $19/day, Park 'N Go costs slightly more per day but offers a faster shuttle frequency (every 5-10 minutes vs the Quick Ride Ramp's schedule).

Pre-booking online typically locks in the best available rate. Drive-up pricing may be higher during peak travel periods. MSP sees heavy volume around summer holidays and winter breaks, so booking ahead matters. For tips on saving more, check our MSP airport parking coupon guide for current discount codes and deals.

How Does the Park N Go Shuttle Work at Minneapolis Airport?

The Park 'N Go shuttle runs every 5-10 minutes, 24 hours a day, 7 days a week to both Terminal 1 and Terminal 2. You don't need to call ahead or schedule a pickup — the shuttle loops continuously between the lot and both terminals.

When you arrive at the lot, a gate attendant will check you in. After you park, proceed to the designated shuttle pickup area. The shuttle will take you directly to Terminal 1 (Lindbergh) — serving Delta, American, United, Alaska, Air Canada, and others — or Terminal 2 (Humphrey) — serving Southwest, Sun Country, JetBlue, Frontier, and Allegiant. The total ride from the lot to the terminal is approximately 8-12 minutes, depending on traffic and terminal order.

On return, go to the ground transportation or shuttle pickup area at your terminal. The driver will take you back to the Park 'N Go lot. If your flight is delayed or cancelled, the shuttle still runs — there's no extra fee to retrieve your car outside normal hours. In winter, allow extra time for snow and ice conditions on the roads between the lot and MSP terminals.

The shuttle also includes luggage assistance — staff will help load and unload bags. This is a real advantage for travelers with heavy bags or young children. No competitor at this price point reliably offers it with 24/7 shuttle access combined.

Park N Go vs MSP On-Airport Parking: Which Option Saves You More?

For most trips longer than two days, Park 'N Go saves money over on-airport ramps. The tradeoff is a short shuttle ride instead of walking directly from your car to the terminal.

• Park 'N Go ($20/day): Best for travelers who want off-site savings with a fast, frequent shuttle. Good for both terminals. Free 24/7 shuttle every 5-10 minutes.
• MSP Quick Ride Ramp ($19/day): On-airport, covered ramp with a free shuttle. Slightly cheaper per day, but on-airport convenience for those who prefer staying within MSP property.
• MSP Value Parking at Terminal 2 ($21/day): Walk-to-terminal access from the Orange Ramp. Better if you're flying Southwest or Sun Country and don't want a shuttle at all.
• MSP Terminal 1 Daily Ramps ($30/day): Walk directly to Terminal 1 gates. Worth it only for very short trips where the convenience premium is justified.
• MSP Valet Parking ($50/day): Maximum convenience at Terminal 1. 2.5x the cost of Park 'N Go — only for travelers who need door-to-door speed.

The math is clear for longer trips. A 10-day vacation costs $200 at Park 'N Go vs $300 at Terminal 1 daily ramps — a $100 difference for a 10-minute shuttle ride. For a full breakdown of on-airport ramp pricing, see our MSP airport parking prices guide.

MSP is also in the middle of a $1.9 billion capital improvement program through 2026-2028. Terminal 2 North Expansion is actively under construction. No parking closures are expected in 2026, but allow extra time navigating the airport during construction periods.

How Do You Reserve a Spot at Park N Go MSP?

Booking Park 'N Go in advance is simple and takes less than five minutes. Here's the step-by-step process:

1. Go to a booking platform: Use Triply's MSP parking search to compare Park 'N Go against other lots in one view. You can also book directly at Park 'N Go's official site.
2. Enter your dates: Input your drop-off date and time, plus your return date and time. The system calculates your total cost automatically.
3. Select Park 'N Go MSP: Review the rate, amenities, and shuttle details before confirming.
4. Complete your reservation: Pay online or choose a pay-on-arrival option if available. You'll receive a confirmation email with your booking details.
5. Save your confirmation: Show it at the gate attendant on arrival. No printout required — your phone works fine.

Pre-booking is especially important during summer travel season (June–August), Thanksgiving week, and winter holiday travel. MSP handles millions of passengers annually, and off-site lots fill up faster than travelers expect. Free cancellation is available — check the specific terms on your booking platform at the time of purchase.

If you're considering a hotel stay before an early flight, our MSP airport hotel park and fly guide covers packages that bundle overnight stays with parking — sometimes a better deal for early-morning departures.

What Amenities and Services Does Park N Go MSP Offer?

Park 'N Go provides more amenities than many travelers expect from an off-site lot at this price point. Here's what's included:

• Free 24/7 Shuttle: Runs every 5-10 minutes to Terminal 1 and Terminal 2, no scheduling needed
• Gated Entry: Access-controlled lot — not open to the general public
• Security Cameras: Lot is monitored with CCTV coverage
• Gate Attendant: A staff member is present at the lot entrance during operating hours
• Luggage Assistance: Staff help load and unload bags at shuttle pickup
• Tire & Battery Assistance: Help available if you return to a flat tire or dead battery
• Handicap Accessible Spaces: ADA-compliant parking available in the lot
• Free Cancellation: Available through major booking platforms

The lot is uncovered and self-park. There is no covered garage option at Park 'N Go MSP. If weather protection is a priority for your vehicle — especially during Minnesota winters — consider Shepard Road Airport Parking ($14.50/day), which offers a covered ramp option, or the InterContinental MSP Airport Garage ($29/day) for full covered parking with a skyway to Terminal 1.

Before your trip, confirm you understand TSA security screening guidelines so you can plan your arrival time accordingly. Even with a fast 5-10 minute shuttle ride, plan to arrive at the lot at least 2 hours before domestic flights and 2.5-3 hours before international departures. If you don't have TSA PreCheck, add an extra 20-30 minutes to your security buffer at MSP.

How Do You Get to Park N Go from the Highway?

Park 'N Go is located in Bloomington, MN, near Minneapolis-Saint Paul International Airport. The lot is accessible from multiple highway entry points. Here are written directions from the most common routes:

From Interstate 494 (South Side of MSP)

I-494 runs directly along the south side of the airport. Take the 34th Avenue South exit or the International Drive exit depending on your direction of travel. Follow signs toward the airport/off-site parking. The lot is located in the Bloomington area near the airport perimeter — use the address on your confirmation and check real-time traffic on Waze before you leave, especially during morning rush hour.

From MN-5 (North Side of MSP)

MN-5 connects to I-35W and I-35E and runs along the north side of the airport. Take MN-5 to I-494 eastbound or westbound, then follow the I-494 directions above to reach the Bloomington area near the lot.

From I-35W or I-35E

Both interstates connect to MN-5, which links directly to I-494. From I-35W southbound, take MN-5 east to I-494. From I-35E southbound, take MN-5 west to I-494. Then follow I-494 to the airport area as described above.

Allow 8-12 minutes of drive time from the lot to MSP terminals under normal conditions. During peak morning hours (6–9 AM) on weekdays, budget a few extra minutes for I-494 congestion near the airport.

Is Park N Go MSP Worth It? Our Honest Take

Park 'N Go is a solid option for MSP travelers who want a reliable off-site lot with a fast shuttle and real amenities. At $20/day, it's not the cheapest off-site lot available — EZ Air Park ($12.95/day) and Shepard Road ($14.50/day) both undercut it — but it offers a shuttle frequency of every 5-10 minutes that rivals or beats many competitors, plus luggage help and a gate attendant that budget lots skip.

Compared to on-airport parking, Park 'N Go saves you 33% vs Terminal 1 daily ramps and sits just $1 above the on-airport Quick Ride Ramp — but with more amenities and comparable shuttle frequency. For long trips, the savings are meaningful. For a one-night trip, the on-airport Quick Ride Ramp or Value Parking might be easier.

Travelers flying Southwest, Sun Country, or JetBlue out of Terminal 2 get the same shuttle service as Terminal 1 flyers — the shuttle serves both terminals, which isn't always the case with every off-site lot.

Ready to lock in your spot? Compare MSP airport parking rates — including Park N Go from $20/day — on Triply and book in minutes.